Table of Contents
Advertisement
VCR OPERATION
Timer Recording Using the VIDEO Plus+
You can programme the timer using the PlusCode program-
ming number that are printed in TV guide magazine. You can
set 8 programmes to record.
• Insert a cassette tape with its erase prevention tab in place.
(If necessary, rewind or fast forward the tape to the point at
which you want to begin recording.)
1
Press the VIDEO Plus+ buttons.
NOTE: If you have not set the clock yet, the CLOCK setting
menu will appear. If so , follow the steps outlined in
the "Setting the Clock". Then, set the timer.
2
Press the numerical buttons to set the PlusCode num-
ber of the programme you want to record.
• Press s to go back one digit from current digit while
you set the PlusCode number.
3
• FOR ONCE-ONLY RECORDING : Press the VIDEO
Plus+ button.
• FOR DAILY RECORDING : To record a TV programme
at the same time on the same channel, from Monday to
Friday.
Press DAILY/WEEKLY repeatedly to select DAILY (MO-
FR), then press the VIDEO Plus+ button.
• FOR EVERYDAY RECORDING : To record a TV pro-
gramme at the same time on the same channel every
day.
Press DAILY/WEEKLY repeatedly to select DAILY (MO-
SU), then press the VIDEO Plus+ button.
• FOR WEEKLY RECORDING : To record a TV pro-
gramme at the same time on the same channel every
week.
Press DAILY/WEEKLY repeatedly to select WEEKLY,
then press the VIDEO Plus+ button.
NOTES:
• If the PlusCode number is not available, it will be
cleared automatically when you press the VIDEO
Plus+ button. Enter the correct PlusCode number and
press the VIDEO Plus+ button again.
• If the PlusCode number flashes when you press the
VIDEO Plus+ button, this means that the PlusCode
number you entered was incorrect or the timer record-
ing you just programmed and another timer recording
overlap.
4
Confirm the channel number, then press B.
• If your local channel information is programmed in
VCR/DVD's memory, your local channel number
appears automatically.
• If your local channel information is not programmed in
VCR/DVD's memory, "– –" or an incorrect channel num-
ber may appear. In this case, press K or L repeatedly
until your desired channel number appears. Then,
press B.
• When you select the channel number using K or L, it
memorises in VCR/DVD's memory.
5
Press K or L repeatedly until the desired tape speed
appears.
6
Press K or L to set PDC ON or OFF.
7
Press MENU to exit.
8
Press TIMER ON/OFF to activate the timer.
The TIMER indicator on the VCR/DVD comes on.
Auto Return
If there are any remaining programmes including Daily,
Everyday and Weekly, AUTO RETURN will not operate.
1
Press VCR, then MENU.
2
Press K or L repeatedly to point to SET UP, then press B.
3
Press K or L to point to AUTO RETURN, then press B.
ON will appear next to AUTO RETURN.
4
Press MENU.
Watch the Recorded TIMER PROGRAMME
Press OPERATE to turn on the VCR/DVD, then press PLAY.
®
System
The Programme Delivery Control (PDC) is a very convenient sys-
tem which assures that the TV programmes you have pro-
grammed for timer recording, will be recorded exactly from begin-
ning to end, even if the actual broadcasting time differs from the
scheduled time due to delayed start or extension of the pro-
gramme duration. Also, if a programme is interrupted and, for
example, some special news is broadcast, the recording will also
be interrupted automatically and resumed when the programme
continues.
When the PDC signal drop out because the broadcast signal is
weak, or when a broadcasting station does not transmit a regular
PDC signal, the timer recording will be performed in the normal
mode (without PDC) even if it was programmed for PDC.When the
starting time of the PDC timer recording is from 0:00 to 3:59 on a
given day, the PDC function operates from 20:00 on the previous
day to 4:00 on the following day.When the starting time of the PDC
timer recording is from 4:00 to 23:59 on the given day, the PDC
function operates from 0:00 on the day to 4:00 on the following day.
This means that if the relevant programme is broadcasted within
this period, it will be recorded correctly. If the timer is not pro-
grammed correctly, the incorrect timer setting stays in effect unless
you cancel it. To cancel the incorrect timer setting, refer to "To
Cancel or Check the start/end Time" on page 16.
This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• The tape must be fully rewound.
1
Press VCR, then QUICK-FIND.
To skip to the beginning of next programme
Press QUICK-FIND.
To view at normal speed
Press PLAY. The Quick-Find is cancelled.
NOTES:
• This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in
• When the end of a tape is reached during the Quick-
• The index mark will be made automatically when
REC/OTR is pressed. It will also be marked at the starting
point of Timer recording and OTR.
• The index mark is not recorded if STILL/PAUSE is
pressed and released during recording.
• The time gap between index marks on the tape should be
greater than 1 minute for SP recording and 2 minutes for
LP recording.
1
Press SEARCH MODE.
2
Press K or L repeatedly until the number of pro-
grammes that you want to skip appears.
3
Press s or B.
The VCR/DVD begins rewinding or fast forwarding to the
beginning of desired programme.
• When the preset programme is reached, the VCR/DVD
NOTES:
• Index Search can be set up to 20.
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds,
• To exit the Index Search mode, press MENU in step
– 17 –
PDC (Programme Delivery Control)
Quick-Find
progress, press STOP.
Find, the tape will automatically rewind to the beginning.
After rewinding finishes, the VCR/DVD will eject the tape.
Index Search
will start playback automatically.
from steps
2
to
3
. Otherwise the Index Search
mode will be cancelled.
2
. Or press STOP after step
3
.
EN
Advertisement
Table of Contents
