RCA DH93RF User Manual page 2

Connections
Follow these steps to connect your RF Modulator.
1. Connecting to your video source
How you connect the RF Modulator to your video source (DVD player, video game system, etc.) depends on the outputs
your video source has. Look at the back panel of your video source to see which of the following best matches the
connections it offers. Then, follow the directions for that connection.
S-Video and Stereo Audio Connection
Video
Source
RF Modulator
3. Plug the connector on one end of an S-Video cable
(not included) into the S-Video input jack on the RF
Modulator.
4. Plug the connector on the cable's other end into the
S-Video output jack on the video source.
Video and Stereo Audio Connection
Video Source
A/V Cable
RF Modulator
Note: The audio signal will be modulated to mono,
whether the video source is stereo or mono.
1. Plug the red and white
connectors on one end
of the provided ste-
reo A/V cable into the
audio input jacks on
the RF Modulator.
Do not plug in the yel-
low connector.
2. Plug the red and white
connectors on the
cable's other end into
the audio output jacks
on the video source,
using the color coding
on the connectors as a
guide.
Do not plug in the yel-
low connector.
1. Plug the connectors on
one end of the pro-
vided stereo A/V cable
into the video and
audio input jacks on
the RF Modulator.
2. Plug the connectors
on the cable's other
end into to video and
audio output jacks on
the video source, using
the color coding on the
connectors as a guide.
Video Source
A/V Cable
RF Modulator
Video and Mono Audio
Connection
1. Plug the connectors on
one end of the provided
A/V cable into the video
and audio input jacks on
the RF Modulator (using
either the AUDIO R or L
jack).
2. Plug the cable's other
ends into the video and
audio jacks on the video
source.