Connecting A Power Source; 连接电源 - Samsung VP-DC563i Owner's Instruction Manual

ENGLISH
Preparation

Connecting a Power Source

 There are two types of power source that can be connected to your
DVD Camcorder.
- The AC Power adapter: used for indoor recording.
- The Battery Pack: used for outdoor recording.
Using a Household Power Source
Connect to a household power source to use the DVD Camcorder
without having to worry about the battery power. You can keep the
Battery Pack attached; the battery power will not be consumed.
1. Connect the AC Power
adapter (AA-E9 TYPE) to a
wall socket.
The plug and wall socket
type may differ according to
your resident country.
2. Open the LCD Screen and
Jack Cover.
3. Connect the DC cable to
the DC IN jack of the DVD
Camcorder.
4. Set the DVD Camcorder to each mode by holding down the Green
Tab on the [Power] switch and turning it to [On] or [Off].
准备
连接电源
 有两种电源可连接至您的DVD摄像机。
- 交流电源适配器：在室内录像的时候使用。
- 使用锂电池组：适合于室外拍摄。
使用家庭的电源
连接至家用电源来使用DVD摄像机可省缺电池电量的担忧。您可以连接
电池组，但不会消耗电池电量。
Power Switch
中 文
1. 连接AC Power适配器（AA-E9
型）到电源插座。
插头和墙上电源插座类型可
能会有所不同。
2. 打开LCD（液晶显示屏）和插
孔盖子。
3. 将DC电缆连接至DVD摄像机上
的DC IN插孔。
4. 将DVD摄像机设置为每个模
式，按住[Power]开关上
的绿色舌片可将它[On]或
[Off]。
25