Manually Installing The Monitor Driver - Lenovo D154W User Manual

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows Vista,
Microsoft. Windows XP. and Microsoft Windows 2000 Professional.
Installing the monitor driver in Windows Vista
To install the device driver in Microsoft® Windows Vista, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in Windows Vista.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
Vista operating system.
4. Open the
Display Properties
and then double-clicking the
5. Click the Personalization icon.
6. Click the Display Settings icon.
7. Click the Advanced Settings button.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on
and then click the "Browse my computer for driver software" button.
12. Select "Let me pick from a list of device drivers on my computer" .
13. Click the Have Disk button. Click on the Browse button and navigate to the
following directory:
X:\Monitor Drivers\Windows Vista
(where X is the drive letter designator for the CD-ROM drive).
14. Select the "LEN113F.inf" file and click the Open button. Click the OK button.
15. Select Lenovo D154 Wide and click Next. The files will be copied from the CD to your
hard disk drive.
16. Close all open windows and remove the CD.
.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo
recommends using either 1360 x 768 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz..
window by clicking
Start, Control Panel
icon.
Hardware and Sound
Update Driver
3-5
Chapter 3.