Table of Contents
Advertisement
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer
to your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and
the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is
currently configured to a display mode outside the range of this monitor, you may
need to re-attach the CRT monitor temporarily until you have re-configured the
1360 x 768 at 60 Hz,
which is the Native Resolution Display
system; preferably to
3 6 0 3 24
mode.
2-5
Chapter 2. Adjusting and using your monitor
Advertisement
Table of Contents
