Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Table 2-1. Direct access controls
Icon
Control
Image Setup
Auto
Volume
VOL+
VOL-
Using the On-Screen Display (OSD) controls
1. Press the MENU-button to activate the OSD window .
2. Press
or
to navigate through the functions. Once the desired function
is highlighted, press the MENU-button
selected has a sub-menu, press
sub-menu functions.
MENU-button to activate it.
3. Press
or
to change the settings of the selected function.
4. To exit and save, select the exit function. If you want to adjust any other
function, repeat steps 2-3.
Description
Activates automatic image adjustment.
Increase volume
decrease volume.
to activate it.
or
again to navigate through the
Once the desired function is highlighted, press
Chapter 2. Adjusting and using your monitor
If the function
2-3