LG STB1000 Installation & Setup Manual page 59

Determining the STB Operating Mode / FTG Channel Map Confi guration Utility Overview
To determine the operating mode of the
STB1000, press MENU on the Installer
Remote. If the end user Function Menu
(showing aspect ratio options) appears,
the STB EBL is in FTG Mode. If the STB
setup menus appear, the EBL is in Pass-
through Mode.
The following pages provide overviews of
the FTG Channel Map and FTG Installer
Menu Configuration Utilities that comprise
the FTG Configuration Application. Refer
to the Free-To-Guest (FTG)
Configuration Application manual for
further information.
Writing an FTG Channel Map into the EBL will switch the EBL from Pass-through Mode to FTG Mode.
FTG CHANNEL MAP
CONFIGURATION UTILITY
206-4147
ASPECT RATIO
Set By Program
ABC 4:3
16:9
Zoom
Just Scan
CHANNEL
OPTION
Click to transfer the STB Channel Map
from the PTC to the EBL and the FTG
Configuration Application. (Requires that
2-5-5 + MENU was performed to transfer
STB Channel Map to PTC.) *
FTG Mode of Operation (Cont.)
Move Enter
PICTURE AUDIO TIME
LOCK
INPUT USB
LEARN
*
Logical Channel numbers will
automatically be assigned in
ascending order, starting with 0
(zero), to the Physical Channels
from the STB Channel Map.
Function Menu
Shows that the EBL is in
FTG Mode . While this menu
is present on-screen,
Installer Menu settings can
ONLY be accessed/changed
using the FTG Configuration
Application.
STB Setup Menus
Shows that the EBL is in
Pass-through Mode .
PRINT MAP
Click to display a printable
FTG Channel Map Report. The
report can also be exported as
an HTML or Text file.
EDIT/ADD MAP
Click to open the FTG Channel
Map Editor to create or edit an FTG
Channel Map (see next page).
WRITE
Click to transfer the FTG
Channel Map to the EBL.
READ
Click to transfer the FTG
Channel Map from the EBL to the
FTG Configuration Application.
59