Resetting The Sound Settings To The Factory Defaults; Connecting Headphones; Selecting The Sound Mode; Setting And Displaying The Current Time - Samsung LE32N7 Owner's Instructions Manual

Resetting the Sound Settings to the Factory Defaults

Connecting Headphones

Selecting the Sound Mode

You can also set these options
simply by pressing the DUAL
button on remote control.

Setting and Displaying the Current Time

If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after
setting the equalizer resets the equalizer setting to the factory defaults.
1. Press the MENU button to display the menu.
Press the or button to select "Sound", then press the ENTER button.
2. Press the or button to select "Reset", then press the ENTER button.
3. Press the EXIT button to exit.
You can select this option when the "Game Mode" is set to "On".
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
When you insert the head set jack into the corresponding port,
you can operate only "Internal Mute" and "Sound Select" (in PIP mode) in Sound menu.
(Refer to "Selecting the Internal Mute" on page 19)
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
You can set the sound mode by pressing the "DUAL" button.
When you press it, the current sound mode is displayed on the screen.
FM
Stereo
NICAM
Stereo
You can set the TV's clock so that the current time is displayed when you press the INFO
button. You must also set the time if you wish to use the automatic On/Off timers.
1. Press the MENU button to display the menu.
Press the or button to select "Setup", then press the ENTER button.
2. Press the or button to select "Time", then press the ENTER button.
3. Press the ENTER button to select "Clock Set".
4.
To...
Move to "Hour" or "Minute"
Set the "Hour" or "Minute"
Press the ENTER button.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
English-20
Audio Type DUAL 1/2
Mono MONO
Stereo STEREO
Dual DUAL 1
Mono MONO
Stereo MONO
Dual MONO
DUAL 2
Default
Automatic
change
MONO
DUAL 2 DUAL 1
Automatic
change
STEREO
DUAL 1 DUAL 1
Press the...
or button.
or button.