Switching The Image Of Rear Display - Pioneer AVD-W6210 Owner's Manual

[PICTURE ADJUST]
Press 5 or ∞ to select [SET UP], and press the MENU-ENTER button.
[PICTURE ADJUST] menu is displayed. (Refer to page 14.)
[PICTURE MODE]
You can select either [STD IMG] or [MIR IMG] for the back-up camera image.
[STD IMG]: You can see the back-up camera image as a non-reverse image.
[MIR IMG]: You can see the back-up camera image like a rear-view mirror image.
Note:
• The initial setting for [PICTURE MODE] is [STD IMG].

Switching the image of rear display

When rear display is combined, you can select either showing navigation images on rear
display or the images of each source.
1. Press 5 or ∞ to select [VIDEO SETTING] from the setup menu, and press
the MENU-ENTER button.
2. Change the rear source setting with 2/3.
Pressing 2/3 will switch between [NAVI] and [SOURCE].
[NAVI] : Navigation images are output from rear display output on the hide-away unit
when navigation images are displayed on Front display.
[SOURCE] : Images of the selected source are output.
Note:
• Images of the map screen of the navigation slightly differ from a standard NTSC style. If map
screen of the navigation is output from rear display output on the hide-away unit, the images may
not be displayed properly according to a display.
V I DEO SE T T I NG
AV I N 2 BACK - UP CAM
REAR SOURCE SOURCE
POLAR I T Y BA T TERY
P I CTURE A D J UST
S E T UP
P I CTURE MODE ST D I MG
RETURN
18