Troubleshooting: Before Contacting Service Personnel; Specifications - Samsung 3 series User Manual

Troubleshooting: Before Contacting Service Personnel

¦
No sound or picture
Normal picture but no sound
Screen is black and power indicator
light blinks steadily
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture, distorted
sound
Remote control malfunctions
'Check signal cable.' message is
displayed
On PC mode, 'Not Supported Mode.'
message is displayed
The damaged picture appears in the
corner of the screen
The 'Resets all settings to the default
values.' message appears.
You may see small particles if you
look closely at the edge of the bezel
surrounding the TV screen.
The TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce.
N
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.

Specifications

¦
Model Name
Screen Size
(Diagonal)
PC Resolution
(Optimum)
Sound
(Output)
Dimensions (WxDxH)
Body
With stand
Weight
With Stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
Left / Right
Design and specifications are subject to change without prior notice.
N
This device is a Class B digital apparatus.
N
For the power supply and Power Consumption, refer to the label attached to the product.
N
● Check that the mains lead has been connected to a wall socket.
● Check that you have pressed the button on your set.
● Check the picture contrast and brightness settings.
● Check the volume.
● Check the volume.
● Check whether the MUTEM button has been pressed on the remote control.
● Check the Speaker Select settings.
● On your computer check; Power, Signal Cable.
● The TV is using its power management system.
● Move the computer's mouse or press any key on the keyboard.
● Adjust the colour settings.
● Check that the broadcast system selected is correct.
● Try to identify the electrical appliance that is affecting the set and move it further away.
● Plug your set into a different mains socket.
● Check the direction, location and connections of your aerial.
● This interference is often due to the use of an indoor aerial.
● Replace the remote control batteries.
● Clean the upper edge of the remote control (transmission window).
● Check the battery terminals.
● Check that the signal cable is firmly connected to the PC or video sources.
● Check that the PC or video sources are turned on.
● Check the maximum resolution and the frequency of the video adaptor.
● Compare these values with the data in the Display Modes.
If Screen Fit is selected in some external devices, the damaged picture may appear in
the corner of the screen. This symptom is caused by external devices, not TV.
This appears when you press and hold the EXIT button for a while. The product settings
are reset to the factory defaults.
This is part of the product's design and is not a defect.
LE26B350F
26 inches
1360 x 768 @ 60Hz
5W X 2
665 x 75 x 453 mm
665 x 215 x 496 mm
7 kg
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
0˚
English - 2
LE32B350F
32 inches
1360 x 768 @ 60Hz
5W X 2
799 x 76 x 530 mm
799 x 218 x 573 mm
10 kg
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
0˚