Setting Up Anynet; Switching Between Anynet+ Devices - Samsung 5 series User Manual

Setting Up Anynet +

¦
Press the tOOLS button to display the tools menu. You can also display Anynet + menu
T
by selecting Tools → Anynet + (hDMI-CEC).
Setup
❑
Anynet + (HDMI-CEC) → Off / On

To use the Anynet + Function, Anynet+ (hDMI-CEC) must be set to On.
When the Anynet + (hDMI-CEC) function is disabled, all the Anynet + related operations
N
are deactivated.
Auto Turn Off → Yes / No

Setting an Anynet + Device to turn Off Automatically when the TV is Turned Off
The active source on the TV remote must be set to TV to use the Anynet + function.
N
If you set Auto turn Off to yes, connected external devices are also turned off when the
N
TV is turned off. If an external device is still recording, it may or may not turn off.
Serching Connections

Serching a connected external devices.
Switching between Anynet + Devices
¦
. Press the tOOLS button.
Then press the ENtERE button to select Anynet + (hDMI-CEC).
. Press the ▲ or ▼ button to select Select Device List, then press the ENtERE button.
. Press the ▲ or ▼ button to select a particular device and press the ENtERE button. It is switched to the selected device.
. If you cannot find a device you want, press the ▲ or ▼ button to select Setup, then press the ENtERE button.
. Press the ▲ or ▼ button to select Searching Connections, then press the ENtERE button.
The message Configuring Anynet+ connection is displayed.
When searching devices completes, the connected devices are listed in the Anynet+ menu.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
N
The time required to scan for devices is determined by the number of connected devices.
N
When the device scan is complete, the number of devices found are not displayed.
N
Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV
N
is on or under a specific circumstance are not displayed in the device list. Therefore select Searching Connections menu to
search devices.
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
N
switch to an Anynet+ device by using the tOOLS button.
English - 
tV Input
Source List : tV
Picture
Edit Name
Anynet+ (hDMI-CEC)
Sound
Channel
Setup
Input
UMove EEnter RReturn
tV Air 
View tV
Select Device

Record

Menu on Device

Device Operation

Receiver :Off 
Setup 
U Move E Enter
R Return
Setup
Anynet+ (HDMI-CEC) : Off
Auto Turn Off : Yes
Searching Connections
U Move E Enter R Return


