Samsung 8 series User Manual page 21

3D
This exciting new feature enables you to
view 3D content. In order to fully enjoy
this feature, you must purchase a pair
of Samsung 3D Active Glasses (SSG-
2100AB, SSG-2200AR, SSG-2200KR) to
view 3D video.
Samsung 3D Active Glasses are sold
separately. For more detailed purchasing
information, contact the retailer where you purchased this TV.
3D emitter
✎
If there is any obstacle between the emitter and 3D
Active Glasses, the proper 3D effect may not be
obtained.
■ 3D Mode: Select the 3D input format.
✎
If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select
3D mode from the list below that provides the
best 3D viewing experience.
✎
When watching 3D images, turn on 3D Active
Glasses.
3D Mode Operation
Off Turns the 3D function off.
2D → 3D Changes a 2D image to 3D.
Displays two images next to
Side by Side
each other.
Displays one image above
Top & Bottom
another.
Displays the images for the left
Line by Line
and right eye alternately in rows.
Displays the images for the
Vertical Stripe left and right eye alternately in
columns.
Displays the images for the
Checker
left and right eye alternately in
Board
pixels.
Displays the images for the
Frequency left and right eye alternately in
frames.
✎
"Side by Side" and "Top & Bottom" are available
when the resolution is 720p, 1080i and 1080p
in DTV, HDMI and USB mode or set to PC
3D
connecting through HDMI/DVI cable.
✎
"Vertical Strip", "Line by Line" and "Checker
Board" are available when the resolution is set to
PC connecting through HDMI/DVI cable.
✎
"Frequency" displays the frequency (60Hz only)
when the resolution is set to PC.
■ 3D → 2D (Off / On): Displays the image for the left eye
only.
✎
This function is deactivated when 3D Mode set to
"2D → 3D" or Off.
■ 3D View point: The overall adjustment of 3D
perspective.
✎
This function is deactivated when 3D Mode set to
"2D → 3D" or Off.
■ Depth: Adjusts focus / depth in "2D → 3D" mode.
✎
This function is only activated when the 3D Mode
is "2D → 3D".
■ Picture Correction: Adjusts the images for the left and
right eye.
■ 3D Auto View (Off / On): If 3D Auto View is set to On,
a "Side-By-Side" format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the HDMI 1.3
transmitter.
✎
If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the
menu.
✎
Support resolution (16:9 only)
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
3D button or corresponding
Resolution Frequency (Hz)
1280 x 720p 50 / 60 Hz
1920 x 1080i 50 / 60 Hz
1920 x 1080p 24 / 30 / 50 / 60 Hz
21
English