MEDIA PLAY (uSB & DLNA)
Connecting a uSB Device
1. Press the PoWEr button to turn the TV on.
2. Connect a USB device containing photo, music and/or movie files to the uSB1(HDD) or
uSB2 jack on the side of the TV.
3. When the Application selection screen is displayed, press the ENTErE button to select
Media Play (uSB & DLNA).
MTP (Media Transfer Protocol) is not supported.
The file system supports FAT16, FAT32 and NTFS.
Certain types of USB Digital camera and audio devices may not be compatible with this
Media Play only supports USB Mass Storage Class devices (MSC). MSC
is a Mass Storage Class Bulk-Only Transport device. Examples of MSC
are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
Please connect directly to the USB port of your TV. If you are using a separate
cable connection, there may be a USB compatibility problem.
Before connecting your device to the TV, please back up your files to prevent
them from damage or loss of data. SAMSUNG is not responsible for any data
file damage or data loss.
Connect a USB HDD to the dedicated port, uSB1 (HDD) port. However, if the connected device requires high power, the
uSB1 (HDD) may fail to support the device.
Do not disconnect the USB device while it is loading.
MSC supports MP3 and JPEG files, while a PTP device supports JPEG files only.
The higher the resolution of the image, the longer it takes to display on the screen.
The maximum supported JPEG resolution is 15360X8640 pixels.
For unsupported or corrupted files, the 'Not Supported File Format' message is displayed.
If sort key is set to Basic View, up to 1000 files can be displayed in each folder. The other sort key can display up to 10000
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM)
is a technology that supports the creation of content, the distribution and management of the content in an integrated
and comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the
illegal copying of contents, as well as managing billings and settlements.
When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen.
If more than 2 PTP devices are connected, you can only use one at a time.
If more than one MSC device is connected, some of them may not be recognized. If a device requires high power (more
than 500mA or 5V), the USB device may not be supported.
If an over-power (Fail add new device USB1/USB2 Power Overload) warning message is displayed while you are
connecting or using a USB device, the device may not be recognized or may malfunction.
using the remote Control Button in Media Play Menu
< P > , EXIT, TV
Move the cursor and select an item.
Select the currently selected item. While playing a slide show, movie, or music file:
- Pressing the ENTErE button during play pauses the play.
- Pressing the ENTErE button during pause resumes the play.
Play or pause the Slide Show, music or movie.
Return to the previous menu.
Run various functions from the Photo, Music and Movie menus.
Stop the current slide show, Music or Movie file.
Jump to previous group/Jump to next group.
Show file information.
Exit Media Play mode.
Stop Media Play mode and Returns to TV mode.
English - 3
TV Rear Panel