Setting Up Anynet - Samsung SyncMaster 3 series User Manual

Advanced Features
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
recording: (*recorder)
(device_name) MENu
(device_name) Tools
(device_name) Title Menu
Stop recording: (*recorder)
receiver
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).

Setting up Anynet+

¦
O
MENum → System → Anynet+ (HDMI-CEC) → ENTErE
■ Anynet+ (HDMI-CEC) (Off / On)
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
■ Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off. However, a
device may not turn off if recording is in progress.
✎
May not be enabled depending on the device.
Switching between Anynet+ Devices
¦
1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the ENTErE button to select Device List.
✎
If you cannot find a device you want, press the
2. Select a device and press the ENTErE button. You can switch to the selected device.
✎
The Device List menu will only appear when you set Anynet+ (HDMI-CEC) to On in the System menu.
x
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
x
If you have selected external input mode by pressing the
Make sure to switch to an Anynet+ device by using the Device List.
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
Shows the tools menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
✎
Depending on the device, this menu may not be available.
Shows the title menu of the connected device. E.g. If a DVD recorder is connected, the title
menu of the DVD recorder will appear.
✎
Depending on the device, this menu may not be available.
Stops recording.
Sound is played through the receiver.
a
button to refresh the list.
SOurCE button, you cannot use the Anynet+ function.
39
English