Multi-Track Sound (MTS)
(analog channels only)
: Choose for channels that are
Mono
■
broadcasting in mono or if you are
having difficulty receiving a stereo signal.
: Choose for channels that are
Stereo
■
broadcasting in stereo.
SAP
: Choose to listen to the Separate Audio Program,
■
which is usually a foreign-language translation.
✎
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (On/Off)
Because each broadcasting station has its own signal
conditions, the volume may fluctuate each time channel
is changed. This feature lets you automatically adjust the
volume of the desired channel by lowering the sound output
when the modulation signal is high or by raising the sound
output when the modulation signal is low.
Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎
When
Speaker Select is set to External Speaker, the
volume and
buttons will not operate and the
MUTE
sound settings will be limited.
✎
When
Speaker Select is set to External Speaker, you
should use these settings.
x
TV speaker: Off, External speaker: On
✎
When
Speaker Select is set to TV Speaker, you
should use these settings.
x
TV speaker: On, External speaker: On
✎
If there is no video signal, both speakers will be mute.
Sound Reset
(Reset All / Reset Sound Mode / Cancel)
: Resets all sound settings to the factory
Reset All
■
defaults.
Reset Sound Mode
: Returns all sound values in the
■
currently selected mode to the default settings.
Page 16