Setting Up Anynet; Switching Between Anynet Devices - Samsung 5 series User Manual

Advanced Features

Setting Up Anynet

¦
Setup
■
Anynet (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet
+
✎
When the Anynet
Auto Turn Off (No / Yes): Setting an Anynet
✎
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.
However, a device may not turn off if recording is in progress.
✎
May not be enabled depending on the device.
¦ Switching between Anynet
1. Anynet devices connected to the TV are listed.
+
✎
If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the selected device.
✎
Only when you set
x
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
x
If you have selected external input mode by pressing the
Make sure to switch to an Anynet
Recording
¦
You can make a recording of a TV programme using a Samsung recorder.
1. Select Recording.
✎
When there are more than two recording devices
x
When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎
When the recording device is not displayed, select
2. Press the EXIT button to exit.
✎
You can record the source streams by selecting
✎
Pressing the
another device, the video from the device is recorded.
✎
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device's users manual.
36
English
[LC550-XH]BN68-02688P.indb 36
+
(HDMI-CEC) function is disabled, all the Anynet
+
Device to turn off automatically when the TV is turned off.
+
Devices
+
Anynet (HDMI-CEC) to On in the Application menu, the Device List menu appears.
+
device by using the Device List.
+
� (REC) button will record whatever you are currently watching. If you are watching video from
(HDMI-CEC) must be set to On.
+
related operations are deactivated.
+
SOURCE button, you cannot use the Anynet
Device List and press the Red button to search devices.
Recording: (device_name).
function.
+
2010-10-27 12:32:59