Table of Contents
Advertisement
LEDs
Toner
Drum
Paper
Ready
Make a note of the indication and report the error status to your dealer or our Customer Support Centre.
Note
Make sure that the front cover is fully closed before you report a service call.
1
If this error occurs, turn the power switch off, wait a few seconds, and then turn it on again.
*
Leave the printer for 10 minutes with the power on. If the error occurs again, consult your dealer or our
Customer Support Centre.
Table 1: LED indications while pressing Go button
fuser unit
Laser unit
1
failure*
Main motor
failure
failure
Control panel
Main PCB
failure
4
4 - 6
Hide quick links:
Advertisement
Table of Contents
