Scanning From the Operator Panel
The following procedure uses Microsoft
NOTE:
•
Ensure that the printer is connected to the computer using the USB cable.
•
You must use Express Scan Manager on your computer to configure the output destination of the scanned
image files.
1
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the Document Glass" on page 114
2
Press the
(Scan) button.
3
Select Scan to Application, and then press the
4
Configure the scanning settings as necessary.
5
Press the
(Start) button.
The scanned image file is generated.
NOTE:
•
If the following dialog box appears on your computer, select Express Scan Manager-Btype, and then
click OK. Once you select the Always use this program for this action check box when selecting
Express Scan Manager-Btype, the selected application is automatically used without displaying the
program selection window.
See also:
• "Express Scan Manager" on page 52
®
®
Windows
XP as an example.
button.
Scanning
140