Download  Print this page

Philips CID2680 User Manual Page 9

In-car entertainment system.
Hide thumbs

Advertisement

Note on the power supply lead (yellow)
When you connect other devices to this
system, ensure that the rating of the car
circuit is higher than the total fuse value
of all the connected devices.
Notes on speaker connection
Never connect speaker wires to the
metal body or chassis of the car.
Never connect speaker wires with stripes
to one another.
Connect wires
Caution
Ensure that all loose leads are insulated with
electrical tape.
1
Check the car's wiring carefully, then
connect them to the two supplied ISO
wires.
a
b
c
d
e
f
10
EN
Connector Connect to
1
Brown wire Telephone mute
2
Red wire
3
Orange wire Illumination switch
4
Black wire
5
Yellow wire The +12V car battery
6
Blue wire
j
i
h
7
Green and
g
green/black
wires
8
White and
white/black
wires
9
Gray and
gray/black
wires
10 Purple and
purple/black
wires
The +12V power terminal
which is live in the
accessory (ACC) position
of the ignition switch
If there is no accessory
position, connect to the
+12V car battery terminal
that is always live. Be sure
to connect the black ground
(earth) lead to a metal
surface of the car first.
A metal surface of the car
First connect the black
ground (earth) lead, then
connect the yellow and red
power supply leads.
which is live at all times.
The electric antenna
control lead or power
supply lead of the antenna
booster
If there is no electric
antenna or antenna
booster, or it is manually
operated telescopic
antenna, it is not necessary
to connect this lead.
Left speaker (Rear)
Left speaker (Front)
Right speaker (Front)
Right speaker (Rear)

Advertisement

Table of Contents

   Also See for Philips CID2680

   Related Manuals for Philips CID2680

Comments to this Manuals

Symbols: 0
Latest comments: