Standard Horizon INTREPID GX1260S Owner's Manual page 10

POS / IC key
1. Press the POS/IC key, when connected to a GPS receiver, to displays
position data (LAT/LON) on the LCD.
Secondary use
Press and hold the POS/IC key to activate the intercom. The intercom
feature is only possible when the optional RAM MIC (CMP23) is
connected to the transceiver.
r RAM MIC CONNECTOR
Connects the Remote Access Microphone (RAM MIC). Refer to
"section 7.0, (RAM MIC OPERATION).
t ACCESSORY CONNECTION CABLE
Connects the radio to a GPS and an external speaker.
y DC INPUT CABLE
Connects the radio to a DC power supply of 13.8V
u ANTENNA JACK
Connects an antenna to the transceiver. Use a marine VHF antenna
with an impedance of 50 ohms.
i PTT (Push-To-Talk) SWITCH
Keys the transmitter when the transceiver is in radio mode. If the
transceiver is in the intercom operation mode, it activates the
microphone for the intercom.
o CLEAR VOICE NOISE-CANCELING MICROPHONE
Transmits the voice message with reduction of background noise.
!0 UP
and DOWN
The UP and DOWN function the same as the UP and DOWN keys on the
front panel of the transceiver.
!1 16/9 Key
Pressing the 16/9 key Immediately recalls channel 16 from any
location. Press and hold the 16/9 key to recall channel 9.
GX1260S
KEYS
Owner's Manual page 7