AMD Geode CS5535 Porting Manual page 22

Gx processor/ cs5535 companion device geoderom porting guide
Table of Contents

Advertisement

32430C
4.2.4.6
ACPI
Location:
9C00h or other normal ACPI location.
Description:
NA
Initialization:
ACPI VSM
4.2.4.7
Power Management Logic
Location:
9D00h put on the end of ACPI.
Description:
NA
Initialization:
VSA technology and ACPI VSM as needed.
4.2.4.8
Flash Interface
Location:
4 LBARs for 4 Flash devices
Description:
NA
Initialization:
The default values for the LBARs are located in BDCFG.INC in the platform directory, but can be
changed at Boot via setup. The Flash interface is configured in the code at ChipsetFlashSetup in
CHIPSET.ASM based on the corresponding NVRAM values.
4.2.4.9
Other Legacy DD Initialization
Location:
Default legacy definitions.
Description:
Initialize COM ports, LPT ports, RTC.
Initialization:
These devices are initialized in the same fashion as with a normal SuperI/O and CS5535. Any MSR reg-
ister settings will be done in chipset individualization. GeodeROM can handle multiple devices and loca-
tions by design.
22
AMD Geode™ GX Processor/CS5535 Companion Device GeodeROM Porting Guide
Initialization

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gx processor

Table of Contents