Aerial Connection; Putting Into Operation; Sockets - Hitachi HDB71 Instruction Manual

3.2.3. AERIAL CONNECTION

If the lead from your TV aerial is currently connected into your TV, then remove this lead from your TV and connect
to the "Antenna In" socket on your STB.
Please note that reception of Digital TV requires a good quality external TV antenna. It is not recommended that
the STB is connected to an internal aerial.

3.2.4. PUTTING INTO OPERATION

Ensure that all connections have been made before connection to the mains supply. Plug the STB into the mains
supply and a RED led will light (standby mode) on the front panel. Wait for about 7 seconds to allow the STB to
"boot". Press the Standby button and the LED will turn Green.

3.2.5. SOCKETS

TV SCART
VCR SCART
2 x Coax connectors. AERIAL IN and AERIAL OUT. RF loop through to TV or VCR, note this is NOT an STB
output.
2 x RCA (phono) Audio output L/R to external Hi Fi.
8