Installing A Battery - HEC NCH20 User Manual

Noise cancelling headphones
Table of Contents

Advertisement

Available languages

Available languages

SAVE THESE INSTRUCTIONS
Thank you for purchasing our HEC device. This easy to use manual will guide you
in getting the best use of your Noise Cancelling Headphones.
Remember to record the model number. It is located on the front of the packaging.
Staple your receipt to your manual. You
will need it to obtain warranty service.
TABLE OF CONTENTS
1. Safety Precautions
2. Parts and Features
3. Installation Instructions
4. Features and Use
TWO | PARTS AND FEATURES
Adaptor Plug
Pouch
THREE | INSTALLATION INSTRUCTIONS

Installing a battery

1. Press down the tab on the
back of the controller and pull
to open and gain access to the
battery compartment.
2. Insert one R02/AAA battery
in the battery compartment.
Ensure the correct polarity
when installing the battery.
Insert the Negative end first.
3. Align the battery lid with the battery compartment, then snap to close the
battery lid.
Model number
Date of purchase _________________
5. Care and Cleaning
6. Troubleshooting
7. Warranty
Power
Indicator
Mute Switch
___________________
Volume
Control
Shirt Clip
(not shown)

Advertisement

Table of Contents
loading

Table of Contents