Table of Contents
Advertisement
1. Press the
key to start the sensor. An animation will appear prompting you to place
your thumb on the lens of the sensor.
2. The device will begin measuring your heart beat rate and the heart icon will blink.
3. The whole measurement will take 15-20 seconds to complete, during the process, you
will see the following screen. Do not move your thumb.
___
bpm
50%
4. When the heart beat measurement has completed, your reading will appear and the heart
icon will stop blinking. You can move your thumb away from the sensor.
Heartbeat
75
bpm
Save
Exit
5. Press the
key to save the heart beat measurement.
Data Saved!
Or press the
key to go back to the main menu without saving the measurement.
23
Advertisement
Table of Contents
