NEC FS-59T90 Instruction Manual page 17

Fine Tuning
CH
If you are unable to get a good picture or sound
VOL VOL
because of a poor broadcasting signal, it is
possible to fine tune a signal.
CH
Select channel frequency ("FREQ.") function.
Press and release the remote control CURSOR
RIGHT/LEFT buttons to fine tune a signal.
Enter station name
CH
Select "NAME" function.
MENU
VOL VOL
Use the CURSOR RIGHT/LEFT buttons to
select the character (letter) you want to modify.
CH
To modify this letter press the CURSOR
UP/DOWN buttons until the desired letter is
displayed.
Store programme in memory
PICTURE/OK
Select "STORE TO" function
Adjust the programme number you want to store
and confirm by pressing the remote control
"PICTURE/OK" button.
Remarks: This function can be also used if you
Warning: This television has been factory
want to copy a programme already
memorised to another programme
number.
pretuned to channels 2, 7, 9, 10 and
28. If the auto search function is
activated, these preset channels will
be deleted and new channels tuned
to 1, 2, 3 ETC..
15