Before Operation; Setting The Clock - AEG MCD2660E Operating Instructions Manual

Before operation

Plug in the oven.
1. The oven display will flash:
2. Press the STOP button, the display will show:
x1
3. To set the clock, see below.
4. Heat the oven without food. (See page 17 note 2).

Setting the clock

There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the COOKING MODE button down for 3 seconds.
will appear in the display.
2. To set the 24 hour clock, press the COOKING MODE button once more after
Step 1, in the example below
To set the clock, follow the example below.
Example: To set the 24 hour clock to 23:35.
1. Choose the clock function.
(12 hour clock).
x1 and hold for 3 seconds
3. Press the COOKING
MODE button to
change from hours to
minutes.
x1
NOTES:
1. You can rotate the TIMER/WEIGHT/POWER knob
clockwise or counter-clockwise.
2. Press the STOP button if you make a mistake during
programming.
3. If the electrical power supply to your microwave oven
is interrupted, the display will intermittently show
will appear in the display.
Choose the 24 hour
clock.
x1
4. Set the minutes. Rotate the
TIMER/WEIGHT/POWER
knob until the correct
minute is displayed (35).
Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
2. Set the hours. Rotate the TIMER/WEIGHT/
POWER knob until the correct hour is
displayed (23).
5. Press the COOKING
MODE button to start
the clock.
after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
x1 and hold for
3 secs.
x1
7