Putting Battery Label; Removing Side Cover On Server - NEC N8103-102 User Manual

Additional dac battery
Hide thumbs Also See for N8103-102:
Table of Contents

Advertisement

1-3. Putting Battery Label

Fill the date (year and month) when the BBU is installed in the server on the battery label
coming with the BBU. Then put the label on the PCI bracket.
The life of the battery is about 2 years while it varies depending on the use
environment and operating conditions. If the battery pack is used after its life,
the maximum data backup time (72 hours) cannot be secured. Replace such
a battery pack with a new one as soon as possible following "Chapter 3
Notice
Operation and Maintenance".

1-4. Removing Side Cover on Server

Remove the side cover on the server following the User's Guide of the server.
Before removing the side cover, turn off the power of the server and remove all the power
cords connected to the power unit from the receptacles.
Set up Date
Y
.M
Fill the year and month.
2006
5
Example) Y
M
29

Advertisement

Table of Contents
loading

Table of Contents