G e t s t a r t e d
General safety instructions
Obey all local laws. Always keep your hands free to operate the vehicle
while driving. Your first consideration while driving should be road safety.
Only operate the mounting device, mobile holder, or navigation device if
it is safe to do so under all driving conditions.
When you install the mounting device or mobile holder, ensure that they
do not interfere with or hinder the steering or braking systems or other
systems used in the operation of the vehicle (for example, airbags) or
disturb your field of vision while driving.
Check that the deployment of the airbag is not blocked or impaired in
Ensure that the mounting device or mobile holder is not installed where
you might come in contact with it in the event of an accident or collision.
Periodically check that the suction cup at the bottom of the mounting
device is firmly attached to the windshield, especially if the ambient
temperature changes a lot.
Do not leave the product parts inside the vehicle in direct sunlight or in
excessive heat. The parts may be damaged if the inside temperature falls
below -0°C (32°F) or exceeds +40°C (104°F).
Mount the device
Locate a safe mounting surface on the windshield, and clean the surface
thoroughly with a glass cleaner and a clean towel. If the ambient
temperature is below +15°C (60°F), carefully warm the surface and the
suction cup at the bottom of the mounting device to ensure a firm grip on