Using the Remote Control
24
Tape/VCR Section
Before operation:
• Set
AUDIO VCR
• For a cassette deck, select
Tape/VC
• For a dual cassette deck, select
Section
cassette deck, press
• You must connect the tape deck both to your receiver's
and audio jacks for these functions to work.
and
DECK 1/DECK 2
TAPE POWER
– VCR CH +
TV/VCR
TAPE SELECT
to
for a cassette deck or to
AUDIO
TAPE 2 MONITOR
or
DECK 1
.
DECK 2
Press to start normal play.
Press to play the reverse side of an auto-reverse cassette
deck.
Press to cancel the current function.
For a cassette deck, lets you quickly locate and play the
beginning of recorded material during play.
When the tape is stopped, lets you rapidly search forward or
backward to locate a specific section of the tape.
For a VCR, lets you rapidly view a tape either forward or
backward.
Selects Deck 1 or Deck 2 when you use a dual cassette deck
with AUDIO VCR set to AUDIO.
Turns on the connected VCR with AUDIO VCR set to VCR;
turns on the cassette deck with AUDIO VCR set to AUDIO.
Note: TAPE POWER does not work with all Optimus Profes-
sional Series cassette decks.
Moves to the next higher or lower channel with AUDIO VCR
set to VCR.
Selects between normal TV viewing and VCR input with
AUDIO VCR set to VCR.
Selects cassette 1 to 6 for a multi-cassette changer.
for a VCR.
VCR
or
.
VCR/TAPE 1
. If you use a single
DECK 2
CONTROL OUT