Auto Program - Samsung ME32C User Manual

Auto Program

MENU m → Channel → Auto Program
Channel
Antenna
Auto Program
Clear Scrambled Channel
Fine Tune
Crosstalk Noise Reduction
- The displayed image may differ depending on the model.
TV
- Available in mode only.
→ ENTER E
Cable
On
The Auto Program function memorizes all channels that are available over the air or through your cable system and adds
them to the Channel List.
To start Auto Program, follow these steps:
1
Push MENU m → Channel → Auto Program
2
On the Auto Program screen, select the source of your product signal.
― Air: If your product is connected to an antenna choose Air, and then press ENTER E. The product will automatically
start memorizing channels.
― Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER E. Go to Step 3.
3
On the cable type screen, use the
STD, HRC, or IRC. Most systems are STD (Standard). When done, select Next, and then press ENTER E. The product will
start memorizing channels.
― Channel memorization can take up to 45 minutes, depending on your cable system.
― Memorized channels are added to the
Added Ch.
buttons on your remote.
Cancelling Auto Program
1
Press the E button.
2
A Stop Auto Program? message appears.
3
Press the E button.
→ ENTER E on your remote. The Auto Program
buttons to select the type of digital and analog cable systems you have:
list. These are the channels you will see when you use the channel
screen appears.
121