Download  Print this page

Alarm, Error And System Messages; Boot Error Messages - Siemens SIMATIC IPC427C Operating Instructions Manual

Hide thumbs

Advertisement

Alarm, error and system messages

12.1

Boot error messages

During startup (the boot process), the BIOS first performs a Power On Self Test (POST) and
checks whether certain functional units of the PC are operating error-free. The boot
sequence is immediately interrupted if critical errors occur.
BIOS initializes and tests further functional units if the POST does not return any errors. In
this startup phase, the graphics controller is initialized and any error messages are output to
the screen.
The error messages output by system BIOS are listed below. For information on error
messages output by the operating system or application programs, refer to the
corresponding manuals.
On-screen error messages
On-screen error message
Operating system not found
Keyboard controller error
Smart error
SIMATIC IPC427C
Operating Instructions, 04/2009, A5E02414743-01
Meaning / tip
Possible causes:
No operating system installed
Incorrect active boot partition
Wrong boot drive settings in SETUP
Controller error.
Contact your technical support team.
Hard disk reports pending failure through S.M.A.R.T.
12
87

Advertisement

   Also See for Siemens SIMATIC IPC427C

Comments to this Manuals

Symbols: 0
Latest comments: