Download  Print this page

Connection Components - Siemens SIMATIC IPC427C Operating Instructions Manual

Hide thumbs

Advertisement

Description
3.5 Design
3.5.2

Connection components

Ports and power supply
Location of connection elements (version with PROFIBUS or CAN)
Pos
Name
24 VDC
DVI/VGA
USB
PN/IND. ETHERNET
PN/IND. ETHERNET
PROFIBUS DP/MPI
CAN fieldbus
COM1
USB strain-relief
fastener
PE terminal
Location of the connection elements (second COM interface)
Pos
Designation
COM2
18
Description
Connection for a 24 V DC power supply
DVI/VGA connection for CRT or LCD monitor with DVI interface
4 USB 2.0 connections, high-speed / low current
RJ45 Ethernet connection 1 (exclusive PCI interrupt) for 10/100/1000 Mbps
RJ45 Ethernet connection 2 (shared PCI interrupt) for 10/100/1000 Mbps
PROFIBUS DP/MPI interface (RS 485 isolated), 9-pin Cannon socket or CAN fieldbus
(on request)
Serial port (RS232) 9-pin Cannon connector
The USB strain relief must be fastened to the device enclosure with an oval-head screw
(M4 thread). The USB cables can be fastened to the strain-relief assembly with a cable
tie.
The PE terminal (M4 thread) must be connected to the protective ground conductor of the
plant, in which the device is to be installed. The minimum conductor cross-section may not
be less than 2,5 mm
.
2
Description
Serial port (RS232) 9-pin Cannon connector
Operating Instructions, 04/2009, A5E02414743-01
SIMATIC IPC427C

Advertisement

   Also See for Siemens SIMATIC IPC427C

Comments to this Manuals

Symbols: 0
Latest comments: