Deactivating The Http Proxy And Configuring A Popup Blocker; Windows Xp - Gigaset SX763 User Manual

Operating information:
u
USB port
If connecting a device without its own power supply directly to the USB port,
please note that the power consumption must not exceed 500mA. If this value is
exceeded, you will have to use a separate power supply unit for your USB device
or connect a USB hub with a separate power supply. A USB hard drive and a USB
printer can be operated simultaneously on a USB hub.
u
LAN ports
The LAN ports may only be used for in-house networks. The ports are destroyed
externally if there is a power surge.
u
Telephone ports
The phone ports are only suitable for connecting in-house phones/phone systems.
The ports are destroyed externally if there is a power surge.

Deactivating the HTTP proxy and configuring a popup blocker

Before you can start the configuration program of the Gigaset SX763 WLAN dsl, you
might need to adjust the settings described below for your Web browser.

Windows XP

Deactivating the HTTP proxy
Make sure that the HTTP proxy
be deactivated so that your Web browser can access the configuration pages of your
router/access point.
The following section describes the procedure for Internet Explorer and Mozilla Firefox.
First decide which browser you are using and then follow the appropriate steps.
u
Internet Explorer
ì
Open Internet Explorer and click Tools and then Internet Options.
ì
In the Internet Options window, click the Connections tab.
ì
Click Settings.
ì
Deactivate all boxes in the Local Area Network (LAN) Settings window.
ì
Click OK and then OK again to close the Internet Options window.
u
Mozilla Firefox
ì
Open Mozilla Firefox. Click Tools and then Settings.
ì
In the Settings window, click Connection Settings....
ì
In the Connection Settings window, select the option Direct connection to the
Internet.
ì
Click OK to finish.
in your Web browser is deactivated. This function must
Appendix
131