Performing the initial set-up
1
Connect the TV to your AC power
outlet (mains socket).
2
For HX700 models, check the
ENERGY SAVING SWITCH setting
is on (
).
z
3
Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
4
Follow the instructions on the screen.
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1
Press F/f to select the channel you want
to move to a new position, then press
2
Press F/f to select the new position for
the channel, then press
~
• You can also tune channels manually.
For HX700 models
only
.
.
Detaching the Table-Top
Stand from the TV
~
• Remove the screws guided by the arrow marks
of the TV.
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
7
GB