From The Add Printer Wizard - Toshiba e-STUDIO163 Operator's Manual

2 INSTALLATION

From the Add Printer Wizard

Upon connecting the e-STUDIO163/203/165/205 to your PC as a local (COM) device, you can
install the printer driver for this e-STUDIO163/203/165/205 using this procedure.
There are various ways of installation according to the Windows version running on your PC.
P.34 "Windows 98 SE/Me"
P.42 "Windows 2000"
P.54 "Windows XP/Server 2003"
Windows 98 SE/Me
The printer drivers in the languages listed below are on the CD-ROM supplied with your
machine.
Please select the language sub-folder by following the language of the Windows you are using.
The following describes an installation on Windows 98 Second Edition.
The procedure is almost the same when Windows Me is used.
Please make sure that following terms are satisfied.
Close all applications that are running to avoid any conflicts during installation.
The TOSHIBA e-STUDIO163/203/165/205 is connected to your PC and powered on.
The USB driver has been already installed on your PC.
To install the USB driver, see the following page.
P.17 "Windows 98 SE/Me"
34 Installing the Printer Driver to the Local Client
\Bra_Por : Portuguese [Brazilian]
\CaFrench : French [Canadian]
\Chinese : Chinese
\Danish : Danish
\Dutch : Dutch
\Finnish : Finnish
\French : French
\German : German
\Italian : Italian
\Mex_Span : Spanish [Mexican]
\Norwe : Norwegian
\Portu : Portuguese
\Spanish : Spanish
\Swedish : Swedish
\UK_Eng : English [UK]
\US_Eng : English [US]