Operating Instructions - Frigidaire 100 Series Use & Care Manual

Operating Instructions

Wash Cycle Selections
Note: Cycle times are approximate and not all
cycles available on all models.
Pots & Pans
(89 minutes) (2 washes, 4 rinses, dry)
(7.2 gallons) (6.0 imp. gallons) (27.3 liters)
For pots, pans, casseroles and dinnerware
with dried-on or baked-on soils:
• Turn dial to POTS & PANS.
• Select desired OPTIONS.
Heavy Wash
(89 minutes) (2 washes, 4 rinses, dry)
(7.2 gallons) (6.0 imp. gallons) (27.3 liters)
For heavily soiled dishes and silverware:
• Turn dial to HEAVY WASH.
• Select desired OPTIONS.
Normal Wash
(81 minutes) (2 washes, 3 rinses, dry)
(6.0 gallons) (5.0 imp. gallons) (22.7 liters)
For regularly soiled dishes and silverware:
• Turn dial to NORMAL WASH.
• Select desired OPTIONS.
Light Wash
(74 minutes) (1 wash, 3 rinses, dry)
(4.8 gallons) (4.0 imp. gallons) (18.2 liters)
For lightly soiled or pre-rinsed dishes and
silverware:
• Turn dial to LIGHT WASH.
• Select desired OPTIONS.
Rinse/Hold
(8 minutes) (1 rinse)
(1.2 gallons) (1.0 imp. gallons) (4.5 liters)
For rinsing dishes that will be washed later:
• DO NOT USE detergent.
• Turn dial to RINSE/HOLD.
(continued)
Plate Warmer
(14 minutes) (dry) (0 gallons)
For warming dishes and serving plates before
serving hot foods.
• Load clean plates and dishes to be
warmed.
• Turn dial to PLATE WARMER.
• Select HOT DRY option.
Energy Options
Hot Dry Option
HOT DRY option provides faster drying since
the heating element is on during the drying
portion of the cycle.
Cool Dry Option
COOL DRY option saves electricity since the
heating element is off during the drying portion
of the cycle. To speed drying process, open
the door slightly after the cycle is complete.
Some water droplets may remain on door and
tub and in areas where dishes touch
silverware basket and rack.
With either option, you may see water vapor
coming from vent during drying portion of
cycle. The vent is closed during washing to
hold moisture and sound inside and then
opens for drying.
The drying option may be changed at any time
during the cycle and affects only the drying
period.
5