Making A Single Copy - Xerox WorkCentre XK35C User Manual

Making a single Copy

Follow this procedure when you need to make a single copy of your original
document.
1
Make sure the WorkCentre is powered on. Load paper in one of the
paper feeders. The Display should show the message
2
Open the platen cover. Make sure the
glass is clean. Load the document on
the document glass facing down and
pushed against the left and rear
guides.
3
Close the platen cover.
NOTE:: If you do not close the platen cover or the document is not
evenly in contact with the document glass, scanning quality will be
severely reduced.
4
Press the Start button. The machine will make one copy with the
following features:
5
For other copy features and functions, see the next section Using the
Copy Menu Features .
O
Normal resolution
O
Normal contrast
O
Plain paper type
O
100% copy size (same as original)
O
Single copy
O
Color mode
001 .
Copying 37