Table of Contents
Advertisement
4
Special Copy
5
Copy Size/Scroll
6
Diagnostic
Display
LEDs
7
Number of Copies Press to set the number of copies from 1 to 50.
8
B&W/Color Mode
9
Percent button
10
Display
6
Getting Started
Press to set an option.
Fits multiple copies on one sheet (clone).
Auto
Reduces or enlarges the original to fit paper size.
100%
Makes a copy the same size as the original.
Press and hold one of these two buttons to reduce
or enlarge the copy size from 25% to 400% of the
original document in 1% increments. Also used to
scroll through the menu choices as shown in the
Display.
Lights up when colour cartridge ink level is low.
Lights up when black cartridge ink level is low.
Lights up when a paper jam occurs or the paper
feeder is empty.
Press to select between black and white mode and
color mode.
Black and white mode
Colour mode
Press to change the Display. When this % light is
on, the Display shows the current copy size. When
the LED light is off, the Display shows the current
status of the machine.
Used to display machine status, copy size, menu
codes and error codes.
ª
Advertisement
Table of Contents
