Canon VK-64 Viewer Manual page 27

Tip
●
Using the Camera Control Panel
Pan/Tilt controls. Click
to nudge or click and
Set Night
hold for continuous
Mode.
movement.
Click this button to Click this button
display exposure to display white
control (➝ P. 28).
balance control
(➝ P. 29).
If preset camera
angles have been
set up by your
Switch On and Off of
Administrator, they
external device
will be available from
output of the camera.
a drop-down menu.
If you have camera control, you can only drag the window by
clicking and holding the title bar.
When you have control, the camera can be controlled either by
clicking or moving the mouse while holding the left button
down. The latter method provides finer control.
If a control warning "Control will be lost in 10 seconds."
appears, it means you have stopped making changes for 30
seconds and a 10 second countdown commences. To continue
control, click in the Video Window, i.e. use the controls.
You can still manipulate a camera that is currently recording.
If the recording position has been set, the Camera Server will
return to that position after the Viewer release camera control.
Clicking this button
returns the camera
to face the front.
When the Video
Window is selected,
click Get Control.
Click Release
Control when
finished.
Adjust Pan, Tilt and Zoom
To display, select View > Camera Control
from the menu bar, or click the Video
window menu icon (or right-click in the
Video Window) to bring up a context menu
and select Camera Control.
If a Video Window is not selected, the
preview window will be blank. Click on a
Video Window to control the camera.
You can control the pan, tilt, and zoom
operation using a panorama image. Click
inside the Panorama window to adjust the pan
and tile angles so that the clicked position
becomes the center of the image.
Alternatively, you can move or zoom in/out the
yellow scope to perform the pan, tilt, and zoom
operation.
If the digital zoom is enabled by the Camera
Server, a boundary between the optical and
digital zoom is displayed.
Click and drag the Zoom slider to perform the
zoom operation.
Click this button to display extended camera
control panel (➝ P. 29).
2
27