Frigidaire 137111800B Installation Instructions Manual page 12

Frigidaire gas & electric dryer installation instructions
Table of Contents

Advertisement

Available languages

Available languages

Electrical connection (non-Canada) - 4 wire cord
(NEMA type 14-30R)
- ELECTRICAL SHOCK HAZARD - Failure
to disconnect power source before servicing could result in
personal injury or even death.
1.
Turn off power supply to outlet.
2.
Remove the screw securing the terminal block access
cover in the lower corner on the back of the dryer.
3.
Install a UL-approved strain relief according to the power
cord/strain relief manufacturer's instructions in the power
cord entry hole below the access panel. At this time, the
strain relief should be loosely in place.
4.
Thread an UNPLUGGED, UL-approved, 30 amp. power
cord, NEMA 14-30 type ST or SRDT, through the strain
relief.
5.
Disconnect the internal (BLACK) dryer harness ground
wire from the (GREEN) ground screw next to the terminal
block.
6.
Attach the ground (GREEN) power cord wire to the
cabinet with the ground (GREEN) screw. Tighten the
screw securely.
7.
Move the internal dryer harness ground (BLACK) wire to
the terminal block and attach it along with the neutral
(WHITE) power cord wire conductor to the center, SILVER
colored terminal on the terminal block. Tighten the screw
securely.
8.
Attach the RED and BLACK power cord conductors to
the outer, BRASS colored terminals on the terminal block.
Tighten both screws securely.
- ELECTRICAL SHOCK HAZARD - Do not
make a sharp bend or crimp wiring/conductor at connections.
9.
Follow manufacturer's guidelines for fi rmly securing the
strain relief and power cord.
10.
Reinstall the terminal block cover.
4-wire receptacle
30 AMP
30 AMP
NEMA 14-30
NEMA 14-30
If a terminal screw falls during cord installation, it
can be retrieved in the terminal screw recovery slot below the
access panel.
Move internal ground (BLACK)
Move internal ground (BLACK)
wire to neutral (SILVER)
wire to neutral (SILVER)
terminal for 4-wire system.
terminal for 4-wire system.
GREEN
GREEN
ground screw
ground screw
GREEN
GREEN
ground wire
ground wire
12
Neutral
Neutral
(WHITE wire)
(WHITE wire)
Ground
Ground
(GREEN wire)
(GREEN wire)
Access cover
Access cover
screw
screw
Terminal
Terminal
block
block
Line 2
Line 2
(BRASS terminal)
(BRASS terminal)
Neutral
Neutral
(SILVER terminal)
(SILVER terminal)
Line 1
Line 1
(BRASS terminal)
(BRASS terminal)
Internal ground
Internal ground
(GREEN screw)
(GREEN screw)
Install
Install
UL-approved
UL-approved
strain relief here
strain relief here
Terminal screw
Terminal screw
recovery slot
recovery slot
Neutral
Neutral
terminal
terminal
WHITE
WHITE
neutral wire
neutral wire
BLACK
BLACK
or RED
or RED
power wire
power wire
BLACK or
BLACK or
RED power wire
RED power wire

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gceq2170ksGlgq2170keGlgq2170ks

Table of Contents

Save PDF