Canon PIXMA MX452 Network Setup Manual page 10

Getting your multifunction back on your network after a router or network change on windows os

Hide thumbs Also See for PIXMA MX452:

Connecting the Printer to Your Access Point

Step Nine

On 2‐5 Printer Setup, press the left or right arrow to select Wireless

LAN setup and then press the OK button.

The Wi‐Fi light will light up blue.

IMPORTANT:

When Wi‐Fi is first enabled on the printer, it will automatically

search for a Wi‐Fi Protected Setup (WPS) access point. If a WPS

access point is detected, a scrolling message (like the one shown

below) will appear for you to press the WPS button on your

access point. If you are unsure where the WPS button is located

or if your access point supports this technology, press the Stop

on the printer to proceed with the install using Standard setup

method.

Note:

The instructions in this document will install the software for

wireless LAN using Standard setup.

To proceed with WPS method, follow the instructions on the

setup guide window of your computer screen.

<<Previous

Next>>

Table of Contents