Brother HL- SERIES User Manual page 7

This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what kind
of power source you have, contact a qualified electrician.
Always disconnect all cables from the wall outlet before servicing, modifying or installing the
equipment.
Power Cord Safety:
• This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded
power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call
your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded
plug.
• Use only the power cord supplied with this product.
• DO NOT allow anything to rest on the power cord. DO NOT place this product where people
can walk on the cord. DO NOT place this product in a position where the cord is stretched or
strain is otherwise put on the cord. Doing so may cause the cord to become worn or fray.
• If an extension cord is used with this product, make sure that the total ampere ratings on the
products plugged into the extension cord. DO NOT exceed the extension cord ampere rating.
Also, make sure that the total of all products plugged into the AC power outlet does not
exceed 15 amperes.
• The power cord, including extensions, should be no longer than 16.5 feet (5 meters).
6