Ink Absorber Full; Ink Low; No Ink Cartridge - Brother MFC-J220 User Manual

Error Message

Ink Absorber Full

Ink Absorber NearFull

Ink low

Low Temperature
Media Error
Media is Full.
No Caller ID
No File

No Ink Cartridge

64
Cause
Internal servicing required.
This problem may be caused by
the use of cartridges other than
genuine Brother Original
cartridges or the refilling of empty
cartridges with ink from other
sources. If damage is caused to
the print head or other parts of this
machine as a result of using other
brands of ink or ink cartridges, any
repairs required as a result may
not be covered by the warranty.
The ink absorber box or flushing
box is near full.
One or more of the ink cartridges
are near the end of their life. If a
sending machine has a colour fax
to send, your machine's
"handshake" will ask that the fax
be sent as monochrome. If the
sending machine has the ability to
convert it, the colour fax will be
printed at your machine as a
monochrome fax.
The print head is too cold.
The memory card is either
corrupted, incorrectly formatted,
or there is a problem with the
memory card.
The memory card you are using
already contains 999 files.
There is no incoming call history.
You did not receive calls or you
have not subscribed to the Caller
ID service from your telephone
company.
The memory card in the media
drive does not contain a .JPG file.
An ink cartridge is not installed
correctly.
Action
Call Brother Customer Service / your
Brother dealer.
Call Brother Customer Service / your
Brother dealer.
Order a new ink cartridge. You can
continue printing until the LCD shows
Cannot Print. (See Replacing the ink
cartridges on page 56.)
Allow the machine to warm up.
Put the card firmly into the slot again to
make sure it is in the correct position. If the
error remains, check the media drive (slot)
of the machine by putting in another
memory card that you know is working.
Your machine can only save to your
memory card if it contains less than 999
files. Try deleting unused files to free some
space and try again.
If you want to use the Caller ID feature call
your telephone company.
.)
on page 31
(See
Caller ID on page 34
(See
Caller ID (For Singapore, Hong Kong
.)
and Taiwan) on page 36
Put the correct memory card into the slot
again.
Take out the new ink cartridge and re-
install it slowly until it clicks. (See
Replacing the ink cartridges on page 56.)
(See
Caller ID
.)