Brother P-touch 9700PC User Manual page 28

Specify the tape width to be used for
5
printing.
A. If only one printer has been selected.
In the dialog box from step
printer whose setting is to be specified,
and then either double-click it or right-click
it and click "Settings". From the "Set Width"
drop-down list, select the tape width.
Note
Information to be displayed in the dialog
●
4
box from step
"Notes" text box.
B. If multiple printers have been selected.
In the dialog box from step
printers whose setting are to be specified,
and right-click them and click "Settings".
From the "Set Width" drop-down list,
select the tape width. The same tape
width setting is applied to all selected
printers.
Note
The settings below "Printer Settings"
●
and "Notes" are not available.
Click [OK] to close the tape width
6
setting window.
4
, select the
can be entered in the
4 , select the
Click [OK] to close the "Distributed
7
Printing Settings" window.
Setup is completed.
Click [OK] to start distributed printing.
8
Note
If the selected tape width is different from
●
that displayed beside "Current Width",
appears beside the setting below
"Current Width". Load the printer with
tape of the width specified with
"Set Width".
It may be impossible to detect information
●
for a printer connected using the PS-9000
or any common USB hub or print server.
Before printing, enter the settings
manually, and check if the printer can be
used for printing.
Depending on whether a router is used
●
and the security features in use, such as
a firewall, it may not be possible to use
this function.
We recommend performing a connection
●
test for your operating environment. For
more information, contact a sales
representative.
27