Cleaning The Scanner - Brookstone Instant Slide & Negative User Manual

cleanInG The scanneR

To get high image quality and good recognition results, occasionally clean the unit
before scanning films .
Ensure the cleaning brush is clean prior
to use . Store the cleaning brush in a safe
place to protect it from dust and damage .
DO NOT insert the cleaning brush into
the slot at the left side of the scanner .
To clean the scanner, insert the thin end of the
cleaning brush into the right slot against the
bottom side of the scanner (see at right) with the
fabric covered side facing down . Move the cleaning
brush from one side to the other slightly a few
times to clean the scanner .
ATTENTION: DO NOT place the fabric covered side of the cleaning brush
face up and toward the inside of the scanner's slot for cleaning, as this may
cause damage to the internal components.
21
Right side
Left side