4. Unplug the speaker/touch-pad cable from the motherboard so the cable is free. (See the picture
below.)
5. Turn the unit bottom side up and remove the five bottom case screws. Two of the five screws are
hidden at the front corners inside the battery and hard drive slots.
6. Turn the unit face up and remove the six top case screws.
Screw, M2.5×12mm
Speaker/touch-pad
cable connector
Screw, M2.5×3mm
HP OmniBook 2100/3000/3100
Screw, M2.5×5mm
Figure 2-18. Removing the Case Screws
Screw, M2.5×8mm
Screw, M2.5×12mm
Removal and Replacement
2-23