LAMP REPLACEMENT
First insure the power has been turned OFF at the main breaker. Allow bulb to cool before attempting
to remove it. Unscrew the lamp cover and take the old lamp out and replace with new one. Always
use gloves or a cloth rag to insert the new bulb as oils from your skin will cause the bulb to burn out
prematurely. Close the lamp cover and tighten the screws. See bulb replacement at the end of this
manual.
WARNING: This fitting will become hot when in use. Allow bulb to cool before touching.
NOTE: THE INTELLIGENT MOTION SENSOR TRACKING LIGHT IS DESIGNED TO ILLUMINATE WHEN
THE DETECTION AREA IS ENTERED BY A PERSON AND WILL DETECT MOVING HEAT SOURCE.
THERE IS NO GUARANTEE IMPLIED THAT IT WILL PROVIDE TOTAL SECURITY OR PREVENT
ILLEGAL ENTRY.
NG-USB Wireless USB Receiver
Please read the following for the installation of the software and USB Receiver.
Please install the provided software BEFORE connecting the USB receiver!
11