POSIFLEX HT-2000 Series User Manual

POSIFLEX HT-2000 Series User Manual

Ht-2000 series

Advertisement

Quick Links

HT - 2000 Series
User's Manual
Rev. A0
FCC Notes:
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions manual, may cause interference to radio
communications. It has been tested and found to comply with
limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which
are designed to provide reasonable protection against interference when operated in a
commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user at his own expense will be required to take
whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized
technicians opens the machine. The user should consult his/her dealer for the problem
happened. Warranty voids if the user does not follow the instructions in application of
this merchandise. The manufacturer is by no means responsible for any damage or
hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However,
Posiflex will assume no liability for any technical inaccuracies or editorial or other
errors or omissions contained herein, nor for direct, indirect, incidental, consequential
or otherwise damages, including without limitation loss of data or profits, resulting
from the furnishing, performance, or use of this material.
This information is provided "as is" and Posiflex Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied
warranties of merchantability or fitness for particular purpose, good title and against
infringement.
The information in this manual contains only essential hardware concerns for general
user and is subject to change without notice. Posiflex reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide
applicative notices and arrangement for special options utilizing this product. The user
may find the most up to date information of the hardware from web sites:
http://www.posiflex.com or http://www.posiflex.com.tw
All data should be backed-up prior to the installation of any drive unit or storage
peripheral. Posiflex will not be responsible for any loss of data resulting from the use,
disuse or misuse of this or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, or otherwise, without prior express written consent from
Posiflex Inc. the publisher of this documentation.
© Copyright Posiflex Inc. 2005
All brand and product names and trademarks are the property of their respective holders.
Part 1
P/N: 15420900020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT-2000 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX HT-2000 Series

  • Page 1 HT - 2000 Series User’s Manual Rev. A0 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment.
  • Page 2 ALERT TO OUR HONORABLE CUSTOMERS: l Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences. l This product contains inside a Lithium battery and maybe also a sealed type Lead acid battery if the UPS battery option is ordered.
  • Page 3: Brief Introduction

    THE USER’S MANUAL The purpose of this manual is to guide the user in the initial installation and general use of the Posiflex HT-2000 series of POS terminals. It does not explain any application software that may be supplied with it.
  • Page 4: The Standard Features

    VGA Port: There is a VGA connector for connection of external monitor without + 12 V DC power supply. USB Ports: The HT-2000 series is equipped with 6 USB type A connectors for connection of USB (Universal Serial Bus) devices. One of the 6 ports is extended to one top edge of case for easy connection to the integrated upgrade kit BC-300 or SD-300.
  • Page 5: System Box Contents

    UPS Battery: 2.3 AH 12V lead acid maintenance free battery 2-in-1 Cash Drawer Control Cable: Cable CCBLA-238, when added to the CR port of the HT-2000 series, can be used to control two Posiflex printer drive type cash drawers. Preload OS: Win 2000, Win XP pro or WEPOS.
  • Page 6: Installation Guides

    TECHNICAL ENHANCEMENTS Applicable technical enhancements in HT-2000 series include serial COM port power supply settings, RTC battery replacement, VGA port power supply setting, DRAM upgrades and adding a half-length PCI adapter card. All...
  • Page 7: Power Adaptor

    of the system unit before pressing these 2 springs. The LCD and touch panel may flip forward by gravity and get or cause damage by hitting anything in front of the system unit. POWER ADAPTOR The power connector resides in the lower left corner of main connector area.
  • Page 8: Lcd Cashier Display

    LCD CASHIER DISPLAY Push down the round plastic Push inward to button at rear of the display base as turn left-right circled in right picture to adjust the display up and down. Release the Push down to button when done will lock the panel turn up-down firmly for application.
  • Page 9: Barcode Scanner (Option)

    application of the keyboard requires no software driver and is free from any software compatibility issue. The system integrator can program the content of the keyboard for the application software following the technical guidance of Posiflex keyboard programming utilities. BARCODE SCANNER (OPTION) Modern barcode scanners applied in POS business are of KB interface type.
  • Page 10: Operating System Recovery

    “CR” found in the main connection area in the system. The user may also use the optional 2-in-1 cash drawer control cable CCBLA-238 to control 2 cash drawers in 1 port. It has a 6-pole plug at one end and two 8-pole plugs at the other. The 6-pole plug should be inserted in the connector marked “CR”...
  • Page 11 (2 ~ 6 min. depending on loading and battery condition) power failure. Battery replacement: In the preloaded OS for a HT-2000 series, there is a built in utility Posiflex Power Switch Manager that will indicate the UPS battery status of the battery. When an installed...
  • Page 12: Led Indicators

    replace the used up UPS battery at power off as soon as possible. Emergency treatment: The battery is constructed maintenance free and leakproof. Its storage space in HT system also provides very good protection as long as the ambient temperature remains below 30 C and the ventilation of the HT system remains free.
  • Page 13: Power On/Off Control

    usage of the battery power, the flashing LED will keep on flashing for few seconds before steady till the AC supply is stable. POWER ON/OFF CONTROL The HT terminal implements electronic power control, such that the main power to the system may be controlled by many methods as below: Hardware power switch Software OFF command Automatic power ON control...
  • Page 14 Emergency Power Off In case of serious system halt due to any reason, the system could fail to be powered off through normal means. Press and hold the Power ON/OFF Switch for Emergency Power Off. Release the switch after the system powered off.
  • Page 15: Side Mount Upgrade Kit Sd-300

    drag and drop feature. If the point is touched, released and touched within a short time interval, it will simulate double-clicking left button of the mouse. Emulating the click on right button of a real mouse is further illustrated in paragraph below.
  • Page 16: Fan Control

    FAN CONTROL In the preloaded OS for this HT system, there is an embedded function that can keep on monitoring the interior temperature and the fan revolution rate and regulating each required fan power to gain maximum ventilation effect with lowest possible noise. This function is disabled by default at delivery.
  • Page 17 gap between the bottom side of front cover and the chassis at the left corner of front cover. Pull the front cover out from this opening to release the left side hook of front cover from the chassis as indicated by the hollow arrow in the picture above.
  • Page 18 Accessing Side Ventilation Grids The operation to further clean the side ventilation grids requires much more highly technical maneuver. Therefore careful attentions must be taken throughout the further cleaning operations below. When the main unit is opened, there must be no liquid spill, no electro-conductive material, no electric charged device come into the area of the main unit.
  • Page 19 Part 19...
  • Page 20 ĵ§i¨Ï¥ÎªÌ T31454 ³o¬O¥ÒÃþªº¸ê°T²£«~¡A¦b ¹Ò¤¤¨Ï¥Î®É¡A¥i¯à·|³y¦¨ ÂZ¡A¦b³oºØ±¡ªp¤U¡A¨Ï¥Î ¨D±Ä¨ú¬Y¨Ç¾A·íªº¹ïµ¦¡C Part 20...

This manual is also suitable for:

Ht-2212hHt-2212Ht-2012hHt-2012

Table of Contents