Problems And Solutions; Printing And Copying Problems; Paper Feeding Problems - Epson Stylus Nx127 Series Quick Manual

Freescale semiconductor all in one printer user manual
Hide thumbs Also See for STYLUS NX127 Series:
Table of Contents

Problems and Solutions

Check the solutions below if you're having trouble using your Epson printer.

Printing and Copying Problems

Make sure your original is positioned in the front right corner of the glass. If
the edges are cropped, move your original away from the edges slightly.
Make sure your paper is loaded short edge first and is positioned against the
right side with the edge guide against its left side. Don't load paper above the
arrow mark inside the edge guide.
Make sure the paper size settings are correct for the paper you loaded.

Paper Feeding Problems

If paper doesn't feed, remove it from the sheet feeder. Flip through the stack to
separate the sheets a little. Then reload the paper against the right side, and
slide the left edge guide against the paper (but not too tightly).
Do not load too many sheets at once. You can load up to 100 sheets of letter-
or A4-size plain paper, 80 sheets of Bright White or Presentation Paper Matte,
or 10 sheets of Premium Photo Paper Glossy (4 × 6 inch only). Load all other
papers one sheet at a time. See your online User's Guide for more information.
Do not load paper with holes punched in it.
If paper is jammed, follow these steps:
1. Gently pull out jammed paper from the output tray or sheet feeder.
2. If paper is stuck inside, press either of the copy buttons to eject the paper.
Remove any jammed paper and torn pieces. If the error light is still lit,
turn off your Epson printer.
Problems and Solutions
29
Table of Contents
loading
Need help?

Need help?

Do you have a question about the STYLUS NX127 Series and is the answer not in the manual?

This manual is also suitable for:

Stylus nx125 seriesC11ca82211C11ca82201

Table of Contents