Audio Adjustments; Introduction Of Audio Adjustments; Using Balance Adjustment; Using The Equalizer - Pioneer DEH-P5050UB Operation Manual

Cd receiver
Hide thumbs Also See for DEH-P5050UB:
Table of Contents

Advertisement

Available languages

Available languages

Section
03

Audio Adjustments

Introduction of audio
adjustments
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select the
audio function.
Turn MULTI-CONTROL to switch between the
audio functions in the following order.
FADER/BALANCE (balance adjustment)—
PRESET EQUALIZER (graphic equalizer recall)
—EQ SETTING 1 (graphic equalizer adjust-
ment)—EQ SETTING 2 (graphic equalizer fine
adjustment)—LOUDNESS (loudness)—
SW SETTING 1 (subwoofer on/off setting)—
SW SETTING 2 (subwoofer setting)—HPF
(high pass filter)—BASS BOOST (bass boost)
—SRC LV ADJUST (source level adjustment)
4
Press MULTI-CONTROL to display the
setting mode of each function.
# Push MULTI-CONTROL left to display the
function selection menu.
# Push and hold MULTI-CONTROL left to dis-
play the main menu.
5
Adjust the each function.
Notes
! You can also select the audio function by
pressing AUDIO on the remote control.
! To return to the previous display, press BACK.
! To return to the main menu, press and hold
BACK.
! To return to the ordinary display, press
BAND/ESC.
! You can select the SW SETTING 2 only when
subwoofer output is turned on in
SW SETTING 1.
! When selecting FM as the source, you cannot
switch to SRC LV ADJUST.
22
En
! If you do not operate functions within about
30 seconds, the display automatically returns
to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1
Use MULTI-CONTROL to select
FADER/BALANCE.
2
Press MULTI-CONTROL to display the
setting mode.
3
Press MULTI-CONTROL to select the seg-
ment you wish to set.
Press MULTI-CONTROL repeatedly to switch
between fader and balance.
4
Turn MULTI-CONTROL to adjust front/
rear speaker balance.
Front/rear speaker balance can be adjusted
between FAD F15 and FAD R15.
Left/right speaker balance can be adjusted be-
tween BAL L15 and BAL R15.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
# FAD 0 is the proper setting when only two
speakers are used.
# When the rear output setting is SUB W, ad-
justing the front/rear speaker balance is not effec-
tive. Refer to Setting the rear output and
subwoofer controller on page 27.

Using the equalizer

The equalizer lets you adjust the equalization
to match the car's interior acoustic character-
istics as desired.

Advertisement

Table of Contents
loading

Table of Contents